Parts Manufactured by Associated Company North Star Aircraft Maintenance Ltd. Under (parts design Approval) PDA13-6 Replacement Parts for APPH Landing Gear
NS157754 Outer Cylinder replaces AIR157754 & AIR157960 $9400.00 USD
NS112104 Outer Cylinder replaces AIR112104 $9187.00 USD
NS109548 Gas Head replaces AIR109548 $965.00 USD
NS155672 Gas Head replaces AIR155672 $765.00 USD
NS158264 Hinge Pin Upper replaces AIR158264 $850.00 USD
NS115292 Plunger Tube Stop replaces AIR115292 $765.00 USD
NS109560 Bushing replaces AIR109560 $175.00 USD
NS109562 Bushing replaces AIR109562 $225.00 USD
NS109836 Bolt replaces AIR109836 $400.00 USD
NS111454 Separator replaces AIR111454 $410.00 USD
NS114076 Hinge Pin replaces AIR114076 $350.00 USD
NS114078 Bushing replaces AIR114078 $250.00 USD
NS116514 Plunger Tube replaces AIR116514 $7900.00 USD
NS116516 Plunger Tube replaces AIR116516 $5500.00 USD
NS117672 Bolt replaces AIR117672 $300.00 USD
NS117534 Retainer replaces AIR117534 $475.00 USD
NS117536 Retainer replaces AIR117536 $475.00 USD
NS118948 Bearing replaces AIR118948 $616.00 USD
NS122996 Retainer replaces AIR122996 $700.00 USD
NS123060 Bushing replaces AIR123060 $127.00 USD
NS127446 Washer replaces AIR127446 $137.00 USD
NS127448 Washer replaces AIR127448 $92.00 USD
NS127450 Sleeve replaces AIR127450 $450.00 USD
NS127452 Liner replaces AIR127452 $304.00 USD
NS127452-1 Liner 1st O/S replaces AIR127452-1 $304.00 USD
NS127456 Bushing replaces AIR127456 $225.00 USD
NS14948 Air Valve replaces AIR14948 $250.00 USD
NS3010 Bushing replaces ARD3010 $189.00 USD
NS3011 Bushing replaces ARD3011 $189.00 USD
NS3013 Bushing replaces ARD3013 $196.00 USD
NS3014 Bushing replaces ARD3014 $196.00 USD
NS3399 Bushing 1st O/S NS114078 $215.00 USD
NS3400 Bushing 2nd O/S NS114078 $263.00 USD
NS3067 Bolt 1st O/S NS109836 $314.00 USD
NS3068 Bolt 2nd O/S NS109836 $334.00 USD
NS3783 Bolt 1st O/S replaces ARD3783 $314.00 USD
NS3784 Bolt 2nd O/S replaces ARD3784 $334.00 USD
NS4207 Bushing 1st O/S NS123060 $200.00 USD
NS4208 Bushing 2nd O/S NS123060 $200.00 USD
NEW Elevator Trim Jack – STC SA16-107 Replacement parts for NB45-1733 & 113069
NS45-1733-503 Elevator Trim Jack w/ Lower Bearing Support
NS45-1733-501 Elevator Trim Jack Replaces NB45-1733
NS113069 Jack Screw Replaces 113069
NS45-2385 Rod End Replaces NB45-2385
NS45-1751 Clamp Chain Guard Replaces NB45-1751
NS45-1751-A Clamp Chain Assy, Bearing Plate
NS45-1753 Small Clamp Chain Guard Replaces NB45-1753
STC INSTRUMENT CLUSTER
FOR YOUR BN ISLANDER
NS80-800-260/300 – Engine Instrument Cluster
Engine Instrument Cluster
Description: This unit is a replacement instrument cluster that fits into the same location on the instrument panel as the OEM location and replaces transducers with new sensors compatible with the new indicators.
Advantages: Modern instruments and transducers that provide improved reliability, stability and accuracy.
Less required maintenance, therefore a cost savings.
Replacement of instruments & transducers costs much lower.
All indicators are surface mounted for easy replacement.
Estimated Installation Time: 12 Hours Post Mod NB/M/200
32 Hours Pre Mod NB/M/200
Note: The NS80-800-260 includes a fuel pressure indicating system suitable for 260HP engine installations. The NS80-800-300 has fuel pressure indicating system suitable for 300 HP engine installations.
BN 2 Islander
NS80-200/300 Ammeter & Voltmeter
Ammeter & Voltmeter
Description: These 2 ¼” instruments replace existing instruments in the overhead panel.
Advantages: Modern instruments that provide improved reliability, stability and accuracy.
270 degree face for a more accurate display reading.
Replacement costs much lower.
All indicators are surface mounted for easy replacement.
Estimated Installation Time: 4 Hours
BN 2 Islander
NS80-400: Flap Position Indicator – 1031; 1251; 1628
(Pre-Mod 1256)
Flap Position Indicator
Description: This 2 ¼” indicator replaces existing indicator in overhead panel.
Advantages: Modern indicator that provides improved reliability, stability and accuracy.
Replacement cost much lower.
270 degree face for a more accurate display reading.
Indicators are surface mounted for easy replacement.
Estimated Installation Time: 6 Hours
BN 2 Islander
NS80-500: Fuel Quantity Indicators and Floats.
Fuel Quantity Indicators and Floats
Description: This installation replaces the indicators and floats with a more reliable 2 ¼” instrument and float assembly with improved circuit integrity for more stable fuel quantity reading.
Advantage: Modern instruments and improved float assembly for improved reliability, stability and accuracy.
Less required maintenance therefore a cost savings.
Replacement cost much lower.
270 degree face for a more accurate display reading.
Indicators are surface mounted for easy replacement.
Estimated Installation Time: 12 Hours