Parts Manufactured by Associated Company North Star Aircraft Maintenance Ltd. Under (parts design Approval) PDA13-6 Replacement Parts for APPH Landing Gear
| NS157754 Outer Cylinder replaces AIR157754 & AIR157960 | $13,440.00 USD |
| NS112104 Outer Cylinder replaces AIR112104 | $12,240.00 USD |
| NS109548 Gas Head replaces AIR109548 | $1,158.00 USD |
| NS155672 Gas Head replaces AIR155672 | $978.00 USD |
| NS115292 Plunger Tube Stop replaces AIR115292 | $918.00 USD |
| NS109560 Bushing replaces AIR109560 | $240.00 USD |
| NS109562 Bushing replaces AIR109562 | $270.00 USD |
| NS111454 Separator replaces AIR111454 | $492.00 USD |
| NS114076 Hinge Pin replaces AIR114076 | $600.00 USD |
| NS114078 Bushing replaces AIR114078 | $300.00 USD |
| NS116514 Plunger Tube replaces AIR116514 | $9,480.00 USD |
| NS116516 Plunger Tube replaces AIR116516 | $7,440.00 USD |
| NS117672 Bolt replaces AIR117672 | $360.00 USD |
| NS117534 Retainer replaces AIR117534 | $570.00 USD |
| NS117536 Retainer replaces AIR117536 | $570.00 USD |
| NS118948 Bearing replaces AIR118948 | $739.20 USD |
| NS122996 Retainer replaces AIR122996 | $840.00 USD |
| NS109836 Bolt replaces AIR109836 | $480.00 USD |
| NS14948 Valve Body replaces AIR14948 | $300.00 USD |
| NS158264 Hinge Pin Upper replaces AIR158264 | $1,260.00 USD |
| NS123060 Bushing replaces AIR123060 | $168.00 USD |
| NS127446 Washer replaces AIR127446 | $164.40 USD |
| NS127448 Washer replaces AIR127448 | $110.40 USD |
| NS127452 Liner replaces AIR127452 | $364.80 USD |
| NS127452-1 Liner 1st O/S replaces AIR127452-1 | $364.80 USD |
| NS127456 Bushing replaces AIR127456 | $270.00 USD |
| NS3010 Bushing replaces ARD3010 | $240.00 USD |
| NS3011 Bushing replaces ARD3011 | $240.00 USD |
| NS3013 Bushing replaces ARD3013 | $240.00 USD |
| NS3014 Bushing replaces ARD3014 | $240.00 USD |
| NS3399 Bushing 1st O/S NS114078 | $270.00 USD |
| NS3400 Bushing 2nd O/S NS114078 | $315.60 USD |
| NS3783 Bolt 1st O/S replaces ARD3783 | $576.00 USD |
| NS3784 Bolt 2nd O/S replaces ARD3784 | $576.00 USD |
| NS4207 Bushing 1st O/S NS123060 | $240.00 USD |
| NS4208 Bushing 2nd O/S NS123060 | $240.00 USD |
| NS127450 Sleeve replaces AIR127450 | $540.00 USD |
| NS3067 Bolt 1st O/S NS109836 | $480.00 USD |
| NS3068 Bolt 2nd O/S NS109836 | $564.00 USD |
NEW Elevator Trim Jack – STC SA16-107 Replacement parts for NB45-1733 & 113069
| NS45-1733-503 | Elevator Trim Jack w/ Lower Bearing Support |
| NS45-1733-501 | Elevator Trim Jack Replaces NB45-1733 |
| NS113069 | Jack Screw Replaces 113069 |
| NS45-2385 | Rod End Replaces NB45-2385 |
| NS45-1751 | Clamp Chain Guard Replaces NB45-1751 |
| NS45-1751-A | Clamp Chain Assy, Bearing Plate |
| NS45-1753 | Small Clamp Chain Guard Replaces NB45-1753 |
Replacement Fuel Valve Assembly STC SA18-33
| Main Fuel Valve | Tip Tank Fuel Valve |
|---|---|
| BN5030-0261 LH Valve replaces 503CA90 | BN5031-0364L LH Valve replaces 503CA90 |
| BN5030-0263 RH Valve replaces 503CA90 | BN5031-0364R RH Valve replaces 503CA90 |
This is considered a Minor Modification and is also FAA approved
Instrument Replacements STC SA10-79
STC INSTRUMENT CLUSTER
FOR YOUR BN ISLANDER
NS80-800-260/300 – Engine Instrument Cluster
Description: This unit is a replacement instrument cluster that fits into the same location on the instrument panel as the OEM location and replaces transducers with new sensors compatible with the new indicators.
Advantages:
- Modern instruments and transducers that provide improved reliability, stability and accuracy.
- Less required maintenance, therefore a cost savings.
- Replacement of instruments & transducers costs much lower.
- All indicators are surface mounted for easy replacement.
Estimated Installation Time: 12 Hours Post Mod NB/M/200
32 Hours Pre Mod NB/M/200
Note: The NS80-800-260 includes a fuel pressure indicating system suitable for 260HP engine installations. The NS80-800-300 has fuel pressure indicating system suitable for 300 HP engine installations.
Engine Instrument Cluster
Ammeter & Voltmeter
BN 2 Islander
NS80-200/300 Ammeter & Voltmeter
Description: These 2 ¼” instruments replace existing instruments in the overhead panel.
Advantages:
- Modern instruments that provide improved reliability, stability and accuracy.
- 270 degree face for a more accurate display reading.
- Replacement costs much lower.
- All indicators are surface mounted for easy replacement.
Estimated Installation Time: 4 Hours
Estimated Installation Time: 12 Hours Post Mod NB/M/200
32 Hours Pre Mod NB/M/200
Note: The NS80-800-260 includes a fuel pressure indicating system suitable for 260HP engine installations. The NS80-800-300 has fuel pressure indicating system suitable for 300 HP engine installations.
BN 2 Islander
NS80-400: Flap Position Indicator – 1031; 1251; 1628
(Pre-Mod 1256)
Description: This 2 ¼” indicator replaces existing indicator in overhead panel.
Advantages:
- Modern indicator that provides improved reliability, stability and accuracy.
- Replacement cost much lower.
- 270 degree face for a more accurate display reading.
- Indicators are surface mounted for easy replacement.
Estimated Installation Time: 6 Hours
Estimated Installation Time: 12 Hours Post Mod NB/M/200
32 Hours Pre Mod NB/M/200
Note: The NS80-800-260 includes a fuel pressure indicating system suitable for 260HP engine installations. The NS80-800-300 has fuel pressure indicating system suitable for 300 HP engine installations.
Flap Position Indicator
Fuel Quantity Indicators and Floats
BN 2 Islander
NS80-500: Fuel Quantity Indicators and Floats.
Description: This installation replaces the indicators and floats with a more reliable 2 ¼” instrument and float assembly with improved circuit integrity for more stable fuel quantity reading.
Advantage:
- Modern instruments and improved float assembly for improved reliability, stability and accuracy.
- Less required maintenance therefore a cost savings.
- Replacement cost much lower.
- 270 degree face for a more accurate display reading.
- Indicators are surface mounted for easy replacement.
Estimated Installation Time: 12 Hours
Estimated Installation Time: 12 Hours Post Mod NB/M/200
32 Hours Pre Mod NB/M/200
Note: The NS80-800-260 includes a fuel pressure indicating system suitable for 260HP engine installations. The NS80-800-300 has fuel pressure indicating system suitable for 300 HP engine installations.